Triprotas

How To Install Dual-Zone Thermostat?

dual zone thermostat

A dual-zone thermostat is the best of both worlds. With this kind of thermostat, you can make two different areas in your home comfortable at the same time. It happens without having to adjust the settings on your thermostat constantly. This way, you can cool off on a hot summer day. But still, keep it warm enough on the other side. When people are starting to come home from work, it gets comfortable.

A dual-zone system also helps save energy costs by keeping one of two zones more efficient. It works than if they were both running at full capacity all day long.

What Does a Dual-Zone Thermostat Refer To?

A dual-zone thermostat can also be used with independent heating and cooling in different rooms. This way, you can make sure of that.  Each room is comfortable without having to adjust the temperature of all of them. For example, you can make certain parts of your home cooler during the day when no one is there. And then warm it up at night before you go to sleep. You can customize your comfort level. It will work by changing the settings on your smart thermostat.

This post will show detailed instructions on installing a dual zone thermostat. The steps are simple and understandable to follow. It can be defined as a system of controls that regulates temperature in two separate parts of a building, therefore, if you use the same air conditioning. Or a heating system for both sections of your house. It shows that installation is something worth considering.

The room temperature controls on each zone enable you to adjust temperature settings individually, which is perfect if one room (e.g. kids’ bedroom) requires more heating or cooling than the other (e.g. living room).

How to Install a Dual-zone Thermostat?

After receiving a newone, you will need to remove the existing thermostat. And install the new one. Start by turning off the power and disposing of old wires. Then locate your current wiring location on the wall. Disconnect them from the power wire before unscrewing screws that hold them in place. After this, attach all wires to your new thermostat (blue is for heating, red for cooling). Add these to their designated terminals according to instructions on the manual for correct wiring order. Make sure to tighten all screws that hold the new thermostat in place.

Go ahead to test the thermostat operation. If everything works well, replace the cover plate. Then turn the power on at the main electrical panel. Now you are done installing your dual-zone heating and cooling thermostat.

Some older systems may not have enough terminal wires to connect your new unit’s two stations. In this case, you’ll either need to buy electrical wire. Otherwise, locate an existing wire in your attic.

Once you find it, connect second station wires to it instead of directly connecting to the power line. Ensure the main thermostat does not control the second station because this can cause improper operations.

And that’s it! Now you can enjoy the power of the new unit. And save energy with the help of a new control device.

Temperature Controlling System

Dual-zone controls usually come in two varieties manual and automatic. Automatic thermostats are generally more expensive than manual. But they allow you to regulate temperature based on the actual time of day. So, for example, if the kids’ bedroom needs more heating at night. The thermostat will raise the temperature automatically. This ensures the kids’ room is kept at a comfortable temperature throughout the night.

Here are the 20 Benefits Of A Dual Zone Thermostat System

1. You can set different heating and cooling times for each room.

2. Each room can be set to a different temperature.

3. No one will need to adjust the thermostat when leaving the house.

4. You can check the status of heating/cooling equipment at any time without entering the room.

5. Your kids will stay warm, and you’ll save money!

6. You can track your power consumption and get more energy efficient over time.

7. Perfect solution for people with asthma or allergies, sensitive to dust, pet dander, pollen etc.

8. Can be used with portable heaters to boost heat output.

9. It can be used with any heating, not just electric ones.

10. Automatically switches on your central heating during the cold season. And switches off when summer comes.

11. It’s perfect for rooms where you need to heat or cool differently.

12.- You can use it with a wide range of different heating and cooling systems. So if your existing system doesn’t have room sensor pads, no problem! The dual zone thermostat will work anyway.

13. Protects you against overheating/cooling in the heating season when your house is empty.

14. You can reduce your energy bills by using this system with an efficient fan heater system.

15. Helps keep your house warm in winter and cool in summer.

16. No more cold living room!

17. You can use it with different electric or gas heating sources.

18. Perfect for houses that are made of solid walls. So no insulation is required.

19.- Perfect if you have a pool area with a cold water pump that isn’t insulated properly. So it’s tough to get the pool temperature just right without having to enter the pool both in winter and summer.

20. You can use it with solar energy.

Conclusion

You can keep one room at a warmer temperature. At the same time, making the other one more comfortable using this type of system. With a dual-zone thermostat, you have complete control over the temp in your home, which can help to lower your energy bills.

YOU MAY ALSO LIKE TO KNOW:

Explain The IoT Sensors Market Report 2020?

A Smart Home System For Home Automation

What Smart Home Technology Shortcuts Do We Apply To Get Smart Home

Leave a Reply

Your email address will not be published. Required fields are marked *